RadarPlus SM161RGN-2 Dual AIS Receiver + GPS + Network
Quantity in Basket:
Price: $1,832.00 USD
The RadarPlus SM161R-2 dual AIS receiver provides:
High-sensitivity AIS data reception
Affordable low price
Hears Class A & B vessel reports
Sends the information to be mapped on a PC or chart-plotter
Less than 1 watt power consumption
AIS REPORTS:Vessel Name
Ethernet Network Capability
Connection to Live Shine Micro AIS Network
NEW AND IMPROVED:Dual Stage RF Input Protection
Receiver Sensitivity of -113dbm
The rugged, industry standard SL161R has now been improved; incorporating
dual stage RF input protection to provide superior protection against
near lightning strikes and high power transmitters. In addition, with
a receiver sensitivity of -113dbm the SM161R-2 is even better than the
industry-leading SL161R. An Automatic Identification System, or AIS, has
become an indispensable tool for navigation and safety at sea. Information
gathered by the RadarPlus is more detailed than radar and enables the
everyday boater to see what's coming long before it is in line of sight.
Designation: Universal Automatic Identification System (AIS) Receiver
Serial RS232 Interface: female DB9 connector, see below for additional
serial interface details
Power Supply: 9 to 20 V nominal
Power Consumption: Less than 1 watt
Temperature Range: -15 to +55 degrees C.
Compass Safe Distance: 1 meter
12 channel internal Global Positioning System (GPS)
GPS antenna interface: SMA connector
Dimensions and Weights
Width: 3.15 in.
Length: 6.89 in.
Height: 2.25 in'
Weight: 2 lb.
Frequencies and Channel Bandwidth
RX AIS1: 161.975 MHz at 25 kHz
RX AIS2: 162.025 MHz at 25 kHz
AIS Data Rate: 9,600 bits/s
Sensitivity: 20% PER @ -113dBm
Adjacent Channel Rejection: 70dB at 25 kHz
Blocking: 80 dB
Intermodulation: 65 dB
Large Signal PER: 0.1% or better
Image Rejection: 70 dB for 20% PER
Spurious Rejection: 70 dB for 20% PER
Antenna Interface: female Type N connector
Serial Interface Details
The serial interface of the RadarPlus is a subset of IEC specification
61993-2, using a 38.4 kbps connection to a host computer. The received
AIS messages are output using the VDM sentence, and GPS location data
is output using the NMEA 0183 sentences. To request full serial interface
specifications, please contact us or call Shine Micro at (360) 437-2503.
The RadarPlus allows AIS enabled software to chart ship positions and
descriptions in real-time. The following packages have been tested and
are fully operational with the SM161R-2:
Rose Point - Coastal Explorer
ICAN - Regulus
Transas - NaviSailor
Xanatos - Titan
Nobeltec - Admiral
EuroNav - seaPro
Chyna Sea - MapTech
Simple Marine Installation
- Mount the SM161R-2 according to the provided mounting diagram.
- Connect the power cable to a 12 volt power source.
- Connect a VHF antenna to the Type N connector on the SM161R-2.
- Optionally connect the serial interface cable to a PC or other AIS
Shine Micro warrants its products to be free from defects for one full
year from the date of purchase. Shine Micro will, at its sole discretion,
repair or replace any components that fail in normal use. Labor and material
costs for such repairs or replacement will be free of charge. This warranty
does not cover failures due to abuse, misuse, accidents, or unauthorized
alterations or repairs.
Attention: A fee of $35.00 will be added to all orders of less than $100.00.* * No fee will be added for MMSI or service orders.
|© 2011 Shine Micro, Inc. all rights reservedPort Ludlow, WA U.S.A.
(360) 437-2503 voice
(360) 437-2483 fax